Ideas On Getting Started With Unfinished Pine Furniture
There is no shortage of retailers happy to sell unfinished pine furniture and you can look for great bargains if you are looking to furnish your house with limited funds. You may have heard that pine is hard to work with and that is at least partly true. The problem comes from the fact that pine is a mixture of hard and soft wood and these different woods may absorb stains at a different rate. This could make achieving the perfect finish a little bit harder than if you were working with some other kind of wood.
Before you begin worrying about how to finish unfinished pine furniture, you need to be sure you get it from the best store. Stores will have different policies when it comes to damages and returns. If the furniture is damaged when the shop is delivering it you should be entitled to at least an exchange or money back. Check all the facts to make sure you are protected.
Finishing will begin by sanding the furniture appropriately and then cleaning up correctly. The only method to get this done correctly is to use a vacuum as sanding produces fine dust that may destroy your finish if not removed. After you have vacuumed use a tack cloth to remove all final signs of dust. Then you need to condition the wood by applying the appropriate conditioner using a cloth. Allow the conditioner to soak in but not to dry until you have got rid off any extra. You should not sand again till it has dried which takes about half an hour but will depend on the air temperature and climate you are working in.
Apply a coat of stain working in the direction of the grain and then simply wait overnight and see the result. Don’t be tempted to begin another coat until the initial one has totally finished or you will need to take the sander out again to your unfinished pine furniture.
Find out more about unfinished pine furniture from an enthusiast who’s been working with it for more than ten years! Check us out at http://www.bare-wood-furniture.com/unfinished-pine-furniture